Bioplastics on marine sandy shores: Effects on the key species Talitrus saltator (Montagu, 1808).

Talitrid amphipods are an important component of detritus web, playing a key role in the fragmentation of organic matters of marine and terrestrial origin, and it is well known that sandhoppers ingest microplastics. To assess the effective consumption of bioplastics and their effects on survival rate and on pollutants transfer (i.e. phthalates) on supralittoral arthropods, laboratory experiments were conducted by feeding adult T. saltator with two different types of bioplastic commonly used in the production of shopping bags. Groups of about 20 individuals were fed with 10 × 10 cm sample sheets of the two types of bioplastic for four weeks. The results show that amphipods ingest bioplastics even in the absence of microbial film and that ingestion of bioplastic can have effects on talitrid amphipods. Microtomographic analyses of faecal pellets seem consistent with this finding. The high phthalate concentrations in freshly collected individuals suggest the presence in the environment of these compounds, and the ability of amphipods to assimilate them, while the decrease in phthalate concentrations in bioplastic-fed individuals could be attributed to the scavenging effect of virgin plastic, as already observed in a previous study. In summary, the results indicate that different bioplastics may have effects on T. saltator (i.e. survival rate and faecal pellets structure) and confirm a potential role of amphipods in the degradation of bioplastics in supralittoral zone of marine sandy beaches, even when bioplastics are not colonized by bacterial biofilm that seems to improve palatability.

Graphene Oxide/Silver Nanoparticles Platforms for the Detection and Discrimination of Native and Fibrillar Lysozyme: A Combined QCM and SERS Approach.

We propose a sensing platform based on graphene oxide/silver nanoparticles arrays (GO/AgNPs) for the detection and discrimination of the native and toxic fibrillar forms of an amyloid-prone protein, lysozyme, by means of a combination of Quartz Crystal Microbalance (QCM) and Surface Enhanced Raman Scattering (SERS) measurements. The GO/AgNPs layer system was obtained by Langmuir-Blodgett assembly of the silver nanoparticles followed by controlled adsorption of GO sheets on the AgNPs array. The adsorption of native and fibrillar lysozyme was followed by means of QCM, the measurements provided the kinetics and the mechanism of adsorption as a function of protein concentration as well as the mass and thickness of the adsorbed protein on both nanoplatforms. The morphology of the protein layer was characterized by Confocal Laser Scanning Microscopy experiments on Thioflavine T-stained samples. SERS experiments performed on arrays of bare AgNPs and of GO coated AgNP after native, or fibrillar, lysozyme adsorption allowed for the discrimination of the native form and toxic fibrillar structure of lysozyme. Results from combined QCM/SERS studies indicate a general construction paradigm for an efficient sensing platform with high selectivity and low detection limit for native and amyloid lysozyme.

Silver nanowires as infrared-active materials for surface-enhanced Raman scattering.

Surface-enhanced Raman scattering (SERS) is increasing in significance as a bioanalytical tool. Novel nanostructured metal substrates are required to improve performances and versatility of SERS spectroscopy. In particular, as biological tissues are relatively transparent in the infrared wavelength range, SERS-active materials suitable for infrared laser excitation are needed. Nanowires appear interesting in this respect as they show a very broad localized surface plasmon resonance band, ranging from near UV to near infrared wavelengths. The SERS activity of silver nanowires has been tested at three wavelengths and a fair enhancement at 1064 and 514 nm has been observed, whereas a very weak enhancement was present when exciting close to the nanowire extinction maximum. These experimentally measured optical properties have been contrasted with finite element method simulations. Furthermore, laser-induced optoacoustic spectroscopy measurements have shown that the extinction at 1064 nm is completely due to scattering. This result has an important implication that no heating occurs when silver nanowires are utilized as SERS-active substrates, thereby preventing possible thermal damage.

The Raman and SERS spectra of indigo and indigo-Ag2 complex: DFT calculation and comparison with experiment.

Using time-dependent density functional theory in conjunction with B3LYP functional and LANL2DZ/6-31+g(d,p) basis sets, static and pre-resonance Raman spectra of the indigo-Ag2 complex have been calculated. Structure optimization, excitation energies and pre-resonance Raman spectra of the indigo molecule have been obtained at the same level of theory. The available experimental Raman spectra at 1064, 785 and 514nm and the SERS spectra at 785 and 514nm have been well reproduced by the calculation. Experimental SERS spectra are confronted with the calculated pre-resonance Raman spectra obtained for the indigo-Ag2 complex. The Raman activities calculated under the infinite lifetime approximation show a strong dependence upon the proximity to the energy and the oscillator strength of the excitation electronic transition. The comparison of the integrated EFs for indigo and indigo-Ag2 calculated Raman spectra, gave some hints as to the enhancement mechanisms acting for the different excitation wavelengths. Whereas for excitation at a wavelength corresponding to 785nm, the enhancement mechanism for the Raman spectrum of the metal complex seems the chemical one, the strong increment (ten times) of the integrated EF of the Raman spectra of the complex in the case of 514nm excitation, suggests the onset of other enhancement mechanisms. Assuming that intra-cluster transitions with high oscillator strength can be thought of as to mimic surface plasmons excitations, we suggest the onset of the electromagnetic mechanisms (EM) as the origin of the Raman spectrum enhancement. Nevertheless, other enhancement effects cannot be ruled out, as a new molecular transition gains strength in the proximity of the excitation wavelength, as a consequence of the symmetry lowering of the molecule in the complex. A large variation across vibrational modes, by a factor of at least 104, was found for the EFs. This large variation in the EFs can indicate that B-term Herzberg-Teller scattering, due to metal and/or charge transfer states, can feed intensity to the inactive (in the molecule) and/or non totally symmetric modes.

Resonance Raman Spectra of o-Safranin Dye, Free and Adsorbed on Silver Nanoparticles: Experiment and Density Functional Theory Calculation.

The properties of o-Safranin (SO) dye in the first electronic excited state were studied with combined experimental and theoretical methods. The electronic absorption spectra of SO molecules are measured in water solution and in the presence of silver nanoparticles. The normal Raman (NRS) and resonance Raman (RR) spectra of solid SO and the surface enhanced Raman (SERS) and surface enhanced resonance Raman (SE[R]RS) spectra of SO adsorbed on silver nanoparticles are measured at different excitation energies. The enhancement factors for selected vibrational bands of the RR, SERS, and SE[R]RS spectra of SO have been obtained with respect to the NRS spectra of the solid after a careful evaluation of the experimental conditions. The data furnished useful information on the excited electronic states and the interactions of SO with silver nanoparticles. The experimental results are discussed on the basis of DFT and TD-DFT calculations (B3LYP/6-311+G(d,p)) on the isolated SO molecule.

Tailored micro-extraction method for Raman/SERS detection of indigoids in ancient textiles.

Indigoid dyes are well known as vat dyes. In their oxidized dichetonic form they are stable and insoluble in water, whereas in their reduced form, commonly known as leuco, they are soluble in water and able to be attached to fabric for dyeing purposes. These blue dyes are usually easily detectable in art objects by means of Raman spectroscopy by adopting for analyses a laser line at a high wavelength, such as a 785 nm diode laser. Unfortunately, in ancient artworks, that are often highly degraded, it is not always possible to collect high quality Raman spectra, which makes the analysis and identification of these compounds particularly challenging. In this work, we present a tailor-made methodology for the extraction and the recognition of indigoid dyes in works of art, which exploits the solubility of these compounds in their reduced form. Excellent Raman and surface enhanced Raman spectroscopy (SERS) spectra of indigo were acquired after micro-extraction on ancient and reference textiles, confirming the reliability of the presented procedure. Moreover, the methodology has been applied also for the extraction of the indigoid dye Tyrian purple on a reference textile, showing excellent results. This analytical method has been found to be extremely safe both for the reference textiles and the investigated ancient textiles, thus being a promising procedure for the selective analysis and detection of indigoid compounds in objects of artistic relevance.

Multivariate Analysis of Combined Fourier Transform Near-Infrared Spectrometry (FT-NIR) and Raman Datasets for Improved Discrimination of Drying Oils.

This work explores the application of chemometric techniques to the analysis of lipidic paint binders (i.e., drying oils) by means of Raman and near-infrared spectroscopy. These binders have been widely used by artists throughout history, both individually and in mixtures. We prepared various model samples of the pure binders (linseed, poppy seed, and walnut oils) obtained from different manufacturers. These model samples were left to dry and then characterized by Raman and reflectance near-infrared spectroscopy. Multivariate analysis was performed by applying principal component analysis (PCA) on the first derivative of the corresponding Raman spectra (1800-750 cm(-1)), near-infrared spectra (6000-3900 cm(-1)), and their combination to test whether spectral differences could enable samples to be distinguished on the basis of their composition. The vibrational bands we found most useful to discriminate between the different products we studied are the fundamental ν(C=C) stretching and methylenic stretching and bending combination bands. The results of the multivariate analysis demonstrated the potential of chemometric approaches for characterizing and identifying drying oils, and also for gaining a deeper insight into the aging process. Comparison with high-performance liquid chromatography data was conducted to check the PCA results.

Alternative SERRS probes for the immunochemical localization of ovalbumin in paintings: an advanced mapping detection approach.

In the field of analytical chemistry, many scientific efforts have been devoted to develop experimental procedures for the characterization of organic substances present in heterogeneous artwork samples, due to their challenging identification. In particular, performances of immunochemical techniques have been recently investigated, optimizing ad hoc systems for the identification of proteins. Among all the different immunochemical approaches, the use of metal nanoparticles - for surface enhanced Raman scattering (SERS) detection - remains one of the most powerful methods that has still not been explored enough for the analysis of artistic artefacts. For this reason, the present research work was aimed at proposing a new optimized and highly efficient indirect immunoassay for the detection of ovalbumin. In particular, the study proposed a new SERRS probe composed of gold nanoparticles (AuNPs) functionalised with Nile Blue A and produced with an excellent green and cheap alternative approach to the traditional chemical nanoparticles synthesis: the laser ablation synthesis in solution (LASiS). This procedure allows us to obtain stable nanoparticles which can be easily functionalized without any ligand exchange reaction or extensive purification procedures. Moreover, the present research work also focused on the development of a comprehensive analytical approach, based on the combination of potentialities of immunochemical methods and Raman analysis, for the simultaneous identification of the target protein and the different organic and inorganic substances present in the paint matrix. An advanced mapping detection system was proposed to achieve the exact spatial location of all the components through the creation of false colour chemical maps.

A remote scanning Raman spectrometer for in situ measurements of works of art.

In conservation science, one of the main concerns is to extract information from an artistic surface without damaging it. Raman spectroscopy has emerged in recent years as a reliable tool for the non-destructive analysis of a wide range of inorganic and organic materials in works of art and archaeological objects. Nevertheless, the technique is still mainly limited to the analysis of micro-samples taken from artistic surfaces. The development of an instrument able to perform non-contact analysis of an area of a few square centimeters aims to further increase the employment of this technique. This paper describes the development of a prototype Raman scanning spectrometer based on a diode laser, a 2D scanning mirror stage and a custom optical system, which can map a surface of 6 cm in diameter at a working distance of 20 cm. The device exhibits collecting optics with a depth of field close to 6 cm, which makes the Raman system suitable for the analysis of non-flat surfaces and three-dimensional objects. In addition, the overall dimensions and weight of the instrument have been limited in order to make the device transportable and, in principle, usable for in situ measurements. Details on the design of the device, with particular emphasis on the collecting optical system, and on results of the characterization tests carried out to assess its performances are reported. Finally, an example of an application involving the identification of pigments from a model painting is presented.

Non-destructive and non-invasive analyses shed light on the realization technique of ancient polychrome prints.

Five polychrome prints representing famous painters, such as Albrecht Dürer, were analyzed using a non-destructive and non-invasive methodology as required by the artwork typology. The diagnostic strategy includes X-ray fluorescence (XRF), reflectance micro-infrared (microFTIR) and micro-Raman (microRaman) spectroscopy. These prints were realized with a la poupée method that involves application of the polychrome inks on a single copper plate, before the printing process. A broad range of compounds (i.e., cinnabar, red lead, white lead, umber earth, hydrated calcium sulfate, calcium carbonate, amorphous carbon, and Prussian blue) was employed as chalcographic inks, using linseed oil as a binding medium. Gamboge was identified in the delicate finishing brush touches realized in watercolor.

The Raman spectrum of hematite: possible indicator for a compositional or firing distinction among Terra Sigillata wares.

The Raman spectrum of hematite (alpha-Fe2O3) is here discussed as a distinctive feature for Terra Sigillata sample wares. The broadening of the Raman lines and the appearance and increasing of the disorder band at 660 cm(-1), while moving from the external slip to the inner body, are proposed as valuation parameters for the study of the mineralogical composition and firing process of pottery productions.